| _EQUIV_INT_REAL | |
| _HashArray | |
| _HashEntry | |
| _KxtermActionsRec | |
| _MODULE_ | |
| _TABLE | |
| ADCDigit | - Id
- ADCDigit.h,v 1.3 2005/05/17 21:07:33 alebedev Exp
|
| AEMDBInterface | |
| AEMPlots | - Id
- AEMPlots.h,v 1.4 2005/08/15 17:31:32 hmeyer Exp
|
| AlignBC | Module which takes BC track segments and determines alignment constants for all planes |
| AlignBC::TrkInfo_t | |
| AlignChamW0 | Module which calculates chamber to chamber alignment |
| AlignChamW0::track__ | |
| AlignChamZ | |
| AlignChamZ::track__ | |
| AlignChamZNoBF | |
| AlignChamZNoBF::track__ | |
| AlignRotB | |
| AlignRotB::track__ | |
| AlignTPCDrift | |
| AlignTPCDrift2 | |
| AlignTPCDrift2::TrkInfo_t | |
| AlignTPCDrift::TrkInfo_t | |
| AlProject56 | |
| AlProjectNt | |
| AlResidNt | |
| antilambdapid_paras_st | |
| antilambdapid_st | |
| ArrayOfStructsTest | |
| AutoAdvance | |
| base64< _E, _Tr > | |
| base64< _E, _Tr >::crlf | |
| base64< _E, _Tr >::crlfsp | |
| base64< _E, _Tr >::noline | |
| base64< _E, _Tr >::three2four | |
| BCAlignNt | |
| BCCrossing | |
| BCCrossing::MeanCrossing_t | |
| BCCrossing::WireEnds_t | |
| BCDigitizer | Module which produces BC digits from BC hits |
| BCkovCalib | JobControl module which goes through beam cherenkov data in a run and fills histograms which can be used to get calibration constants (pedestals and time offsets) |
| BCkovCalibTable | Interface to BCkovCalibTable database table |
| BCKOVDigit | |
| BCkovHit | Class which stores all available information about a channel of beam cherenkov |
| BCkovNt | |
| BCkovPlot | |
| BCkovReco | |
| BCkovResTable | Interface to BCkovRes database table: table which defines response of the BCkov PMT's |
| BCLine | |
| BCReco | |
| BCReco::AssocHit_t | |
| BCReco::CandPair_t | |
| BCReco::CandTrajectory_t | |
| BCReco::TrackFit_t | |
| BCRecoNt | |
| BeamMCloss | Job module which evaluates track energy loss in GEANT |
| BeamMomCalc | Class which extracts TrkCand's and optionally compares beam momentum to SPFit and writes momentum value to DB table |
| BeamMomTable | Interface to BeamMomTable database table |
| BeamNt | |
| BeamSelect | |
| BeamSwimMC | Module which retrieves MCTrack's, and swims charged tracks through the spectrometer, |
| BeamSwimNt | |
| BeamTOF | |
| Bfld | |
| BFMagnet | This class defines magnetic field of an analysis magnet |
| bgpars_st | |
| bgtrks_st | |
| bgvtx_st | |
| bi_info | |
| block_record | |
| block_table | |
| Box3DIntersector | |
| Box3DVolumeFactory | |
| Burst_t | |
| bwcs_t | |
| CalDigitizer | |
| CaloCalib | Interface to CaloCalib DB table |
| CaloCalib::Entry_t | |
| CandMatch | |
| CfgConfig | |
| CfgConfigBuilder | |
| CfgConfigEditor | |
| CfgException | Exceptions thrown by the Config package |
| CfgObserver | |
| CfgParam | A parameter consists of a name, and explanation ("comment") and a collection of data values all of which must be of a single type |
| CfgTable | |
| CfgXMLconfigBuilder | Construct a CfgConfig object from data contained in a <config> XML field |
| CfgXMLconfigdoc | Handle the configdoc XML tag |
| CfgXMLparamBuilder | Construct a CfgParam object from data contained in a XML field |
| cham_pt_ | Struct which contains information on data in a given chamber |
| ChamDigitizer | Class which converts chamber hits to digits |
| ChamDigitizer::ChamInfo_t | |
| ChamDigitizer::WireInfo_t | |
| ChamDigNt | |
| ChamDrift | This singleton class is meant to convert drift time to distance from wire |
| ChamEffTable | Class which provides interface to chameff DB table, which stores plane efficiencies BC's and DC's |
| ChamLinkTest | This is a simple module to test connectivity of chamber digits to corresponding list of hits and hits themselves |
| chisq_cl_st | |
| CircleModel | Fitting a circle model |
| CircleProjector | This is a projector for the tracks |
| CKOVAdcTable | |
| CkovBeamPID | |
| CkovCalDigit | |
| CkovCalDigLst | |
| CkovCalibrator | |
| CkovDigi | |
| CKOVDigit | |
| CkovDigitizer | |
| CkovDigitizer::DigitInfo_t | |
| CkovDigitizer::HistDef_t | |
| CkovDigitizer::MirrorArray_t | |
| CKOVDiscriminatorTable | |
| CkovDParam | |
| CkovDParam::NGParam_t | |
| CkovDParam::TimeParam_t | |
| CkovHits2Digits | |
| CkovMatchTrk | |
| CkovMirrors | |
| CKOVMirrorTable | |
| CKOVNimDiscriminatorTable | |
| CkovPedCalculator | |
| CkovSThruStudy | |
| CkovTdcCal | |
| CkovTdcCalib | |
| CKOVTdcTable | |
| CKOVTestTable | |
| CkovTrk | |
| ClearFlagOnExit | |
| CMapCham | This class provides interface to connection map of each chamber group: BC's, DC1, DC2, DC3, DC4, and PWC's |
| CMapCham::Chan_t | |
| CMapCham::Wire_t | |
| CMapCKOV | |
| CMapRICH | - Id
- CMapRICH.h,v 1.1 2004/03/22 17:57:36 alebedev Exp
|
| CMapTOF | Represent the Time of Flight connection map in software |
| CMapTOF::info_ | |
| CMapTrig | |
| CMapTrigEntry | |
| COMMON_PAWC | |
| COMPLEX | |
| CompStruct | |
| CompTrk | |
| config | |
| context_struct | |
| ConTimeStamp | |
| contxt_table_struct | |
| CountTheEntities | |
| CRACamacTable | |
| CrossComp | |
| Crossing | |
| CSBTCColors | |
| CSBTYColors | |
| CSColors | |
| CSColorScale | |
| CSGrayColors | |
| CSHeatedObjectColors | |
| CSLinGrayColors | |
| CSLOCSColors | |
| CSMagentaColors | |
| CSOCSColors | |
| CSRainbowColors | |
| ct_data | |
| ct_info | |
| CutTable | |
| DaCon | |
| data_pnt | |
| DataComp | |
| DBRunEntry | - Id
- AEMDBInterface.h,v 1.5 2005/08/15 17:31:32 hmeyer Exp
|
| DCCalib | Class to interface to DC calibration constants |
| DCCanvas | A class which holds a few plots for each chamber |
| DCDigit | |
| DCDigitComp | |
| DCDigitizer | |
| DCElecCanvas | |
| DCFitNt | |
| DCTimeCalib | |
| DCTimeFitter | |
| DebugPrint | |
| decayvtxfit_paras_st | |
| dedxfix_pars_st | |
| dedxInfo | |
| DefaultErrorHandler | |
| DefaultLogHandler | |
| DefaultSetupFileFormat | |
| deflate_info | |
| delete_arc | |
| delete_box | |
| delete_ellipse | |
| delete_line | |
| delete_marker | |
| delete_marker3dbox | |
| delete_polyline | |
| delete_polyline3d | |
| delete_polymarker | |
| delete_polymarker3d | |
| delete_text | |
| delta_e_paras_st | |
| DemoModule | |
| DetPid | |
| DevListRead | |
| DevListSet | |
| draw_tobject | |
| DRClient | |
| DRServer | |
| EasyStructTest | |
| EchoStructTest | |
| EDMBlockStatus | Class which implements the unpack status of each detector block |
| EDMDataBucket | |
| EDMEvent | - Id
- EDMEvent.h,v 1.14 2005/06/17 02:47:15 jpaley Exp
|
| EDMEventHandle | |
| EDMEventHeader | Define the MIPP event header structure |
| EDMException | |
| EDMPPCStatus | |
| EDMTimeStamp | Represent the time stamp applied to the data events |
| EDMTriggerId | |
| ElectronPair | |
| ElectronPair::TrackPair | |
| ElectronPairPars | |
| EMCalDSTHead | |
| EMCalDSTList | |
| EMCalGetAdc | Interface to EMCalReco to calculate correction for the nonlinearity |
| EMCalPass2 | |
| EMCalPed | Interface to EMCalPed database table |
| EMCalPedCalib | JobControl module which goes through all beam cherenkov calibration data in a run and fills ADC histograms which will be used to get pedestals at the end of the run |
| EMCalReco | |
| EMCalReco::TrkInfo_t | |
| EMCalSeg456 | |
| EMCalSeg456::TrkInfo_t | |
| EMCalShower | |
| EVD | |
| EVD2DView | |
| EVD3DView | |
| EVDBCDisplay | |
| EVDBeamDisplay | |
| EVDButtonBar | |
| EVDCanvas | |
| EVDCfgEdit | |
| EVDChamOption | |
| EVDCkovDisplay | |
| EVDCKOVOption | |
| EVDDCDisplay | |
| EVDECalDisplay | |
| EVDECalOption | |
| EVDEditMenu | |
| EVDFileMenu | |
| EVDGoToDialog | |
| EVDHeaderPad | |
| EVDHelpMenu | |
| EVDIoModule | |
| EVDJobC | |
| EVDJobMenu | |
| EVDMainDisplay | |
| EVDMainWindow | |
| EVDMCDialog | |
| EVDMCDisplay | |
| EVDMCDisplay::Style | |
| EVDMCDisplay::Styles | |
| EVDMCmchDialog | |
| EVDMenuBar | |
| EVDPolyLine | |
| EVDPrintable | |
| EVDPrintDialog | |
| EVDRBTrack3D | |
| EVDRecoScanCat | |
| EVDRICHDisplay | |
| EVDRICHOption | |
| EVDRootEnv | |
| EVDScanCat | |
| EVDStatusBar | |
| EVDTOFDisplay | |
| EVDTOFOption | |
| EVDTPCDisplay | |
| EVDTPCOption | |
| EVDTrackingDisplay | |
| EVDTransform | Make geometric transformations from 3D space to a 3D display space |
| EVDTriggerDisplay | |
| EVDTriggerOption | |
| EVDTriggerPad | |
| EVDTrigSelectBar | |
| EVDTrkDisplayOption | |
| EVDTrkRBDisplay | |
| EVDTrkRBOption | Class which configures options for TrkRBDisplay |
| EVDWindow | |
| EVDWindowMenu | |
| evntvtx_st | |
| ExpTrig | |
| FillEventSummary | |
| finalfilter_cuts_st | |
| fitquan | |
| FitterB | Basic implementation for a Fitter |
| Flags_t | |
| fmt10_data | |
| fmt10_header | |
| G__cpp_setup_initEventDisplayCint | |
| G__dIhomedImippdImippsoftdIofflinedItmpdILinux2mIGCCdIEventDisplaydIlibEventDisplaymIshareddIEventDisplayCintdOcc_tag | |
| G__Sizep2memfuncEventDisplayCint | |
| gamma_pars_st | |
| gamma_st | |
| gammapid_paras_st | |
| gammapid_st | |
| gcflag_t | |
| GChamGeo | Define a centralized way to get geometry of all chambers: beam, drift, & proportional |
| gckin2_t | |
| gckin3_t | |
| gcking_t | |
| GCkovGeo | |
| gcnum_t | |
| gcnumx_t | |
| GDetGeo | |
| GEMCalGeo | |
| GHCalGeo | |
| glob_t | |
| global_trks_st | |
| globalpart_cuts_st | |
| globalpart_event_st | |
| globalpart_st | |
| GlobalPid | |
| globalpid_cuts_st | |
| globalpid_st | |
| globalvtx_st | |
| GMagnetGeo | This class defines the standard way to get to geometry of both analysis magnets |
| GMIPPGeo | |
| GRICHConst | |
| GRICHGeo | RICH geometry class: provides all functionality like coordinate transformation, projecting particle trajectory onto ring center |
| gridparam | |
| gridraw | |
| GScintGeo | |
| GT0Geo | |
| GTargetGeo | |
| GTOFGeo | |
| GTOFGeo::Bar_t | |
| GTOFGeo::BarGroup_t | |
| GTPCAlign | Interface to TPCAlign database table |
| GTPCDrift | Interface to TPCDrift database table |
| GTPCGeo | |
| HashTable | |
| HBTNtData | |
| HCalDigit | |
| HCalDSTList | |
| Helix_CylinderIntersector | |
| Helix_RectangleIntersector | |
| Helix_RingIntersector | |
| HelixModel | Model for Helixes |
| HelixProjector | The characteristics of this projector are explained in HelixModel.h |
| HelixPropagator | The characteristics of this propagator are explained in HelixModel.h |
| HelixRungeKuttaPropagator | The characteristics of this propagator are explained in HelixRungeKuttaModel.h |
| HelixVertexProjector | The characteristics of this VertexProjector are explained in HelixModel.h |
| Hello | |
| HelloName | |
| Help | |
| Hit | |
| Hit::Entry | |
| HitList | |
| huft | |
| HyperDouble | This class represents a double with its error squared |
| HyperVector | A data class containing a vector and a matrix |
| IFitter | An the interface for a fitter |
| ifixdevicelist | |
| iFixRead | |
| iFixSet | |
| ILogic | Class to perform a logic |
| ILogicFunction | |
| IMatchingEngine | The matching engine its used to match measurements to states or states to states |
| IMeasurement | An Interface to any measurement |
| IMeasurementServer | This is an interface Server to measurements |
| IModel | Interface class for a Trajectory Model |
| IModelConverter | Converts state from model to model |
| IModelSurfaceIntersector | |
| INoiser | An interface to a noiser |
| IoEventFilter | |
| IoEventFilter::Key | |
| IoEventHandle | |
| IoFilter | |
| IoModule | |
| IPackage | |
| IPoint | This an interface to a generalized "Point" |
| IProjector | An interface to projector of states |
| IPropagator | An interface for a propagator |
| IPropertyMap | Interface class for PropertyMap |
| IServer | Base class for servers |
| ISetupFileFormat | |
| ISort | |
| IState | Interface to be implemented by any state |
| ISurface | This class provides an interface for measurement surfaces |
| ISurfaceServer | This class provides an interface for managin interfaces of surfaces It provides an internal iterator of ISurfaces (/*TODO |
| ITrajectory | An interface to a trayectory |
| ITrajectoryFactory | This class provides an interface for creating: IStates, IPoints, ITrayectories IMPORTANT!! DO NOT FORGET to overwrite the destructor of the interfase classes in your derived class! |
| IVertex | |
| IVertexFitter | An the interface for a VertexFitter |
| IVolume | Interface class for volumen |
| IVolumeFactory | This class provides an interface for creating Volumes IMPORTANT!! DO NOT FORGET to overwrite the destructor of the interfase classes in your derived class! |
| IVolumeIntersector | |
| JcgAbsModule | |
| JcgConfigurate | |
| JcgFactory | |
| JcgTestModule1 | |
| JcgTestModule2 | |
| JCXMLjob | Handle the job tag which defines a list of XML files to parse |
| JCXMLjobdoc | Handle the tag marking the start of a job document |
| JCXMLlink | Handle the xmlfile tag which defines a list of XML files to parse |
| JCXMLnode | Handle the node tag which defines a list of XML files to parse |
| JCXMLsequence | Handle the node tag which defines a list of XML files to parse |
| JobCException | This class provides an standard exception to be thrown by reconstruction code |
| JobCHistoFile | Histogram file used by anamipp modules |
| JobCJob | |
| JobCList | |
| JobCmdLine | |
| JobCModule | |
| JobCModuleFactory | Create job modules by name |
| JobCNode | |
| JobCSeqTable | |
| JobCSequence | A sequence is a set of nodes that are executed together as if they were a single node |
| JobCStack | |
| KalmanFitter | A Kalman Filter implementing the Fitter interface |
| KalmanPoint | |
| KalmanReco | |
| KalmanRefit | |
| KalmanState | This is class for Kalman states that inherits from StateB |
| KalmanTrajectory | An extension of a Trajectory Base for a Kalman Trajectory |
| KalmanTrajectoryFactory | This class provides an interface for creating: IStates, IPoints, ITrayectories IMPORTANT!! DO NOT FORGET to destroy of the interfase via the TrajectoryFactory!! |
| KalmanVertex | An extension of a Vertex Base for a Kalman Vertex |
| KalmanVertexFitter | |
| KFieldMap | |
| Kinematics | |
| KMAlignTable | |
| KMassAlignNt | |
| KMassAlignNtuple | |
| KMassAna | |
| KMassAnaNt | |
| KMassContour | |
| KMassCuts | |
| KMassEventFilter | |
| KMassFit | |
| KMassHits | |
| KMassLiteNt | |
| KMassLiteNtuple | |
| KMassNt | |
| KMassNtuple | |
| KMassSegNt | |
| KMassSegNtuple | |
| KMassSim | |
| KMassSplitRing | |
| KMCalibNt | |
| KMContNt | |
| KMCuts_t | |
| KMHitNt | |
| KMLikeNt | |
| KmWindowDsc | |
| KParticle | |
| KProjectorU | |
| KProjectorUHelix | |
| kshortpid_paras_st | |
| kshortpid_st | |
| KTrack | |
| KUtils | |
| KVertex | |
| KWireHit | |
| lambdapid_paras_st | |
| lambdapid_st | |
| LatchWord | Class to define latch word in the offline world |
| ListData | |
| ListMethods | |
| LogicalObjectB | Class to perform a LogicalObject |
| LogicalVolumeB | Class to perform a LogicalVolume |
| LogicB | Class to perform a Logic |
| Lorentz | |
| LsqFitter | Lsq Fit implementing the fitter interface |
| lun_desc | |
| ManyTypesTest | |
| MapPoint_t | |
| MatchComp | |
| MatchingEngine | ITrajectory |
| MCCCaloHits | |
| MCCHit | |
| MCCHitList | |
| MCCHitPair | A weighted list of hits, as, say, contribute to a digit |
| MCConfig | Class which facilitates configuration of MIPP MonteCarlo |
| MCCParticle | |
| MCCRICHHit | |
| MCCTOFHit | |
| MCCTrkList | |
| MCCVertex | |
| MCIDoDigi | Class which handles a digitizer: an object which calls all other digitizers for detectors |
| MCIDoKine | |
| MCIModule | An abstract base class for all digitizers |
| MCIStoreHits | Class which takes hits from GEANT banks and stores them into MIPP event tree |
| MCIStoreHits::HitInfo_t | |
| MCMatch | |
| MCMatches | |
| MCTHitComp | |
| MCTrack | A class which brings particles together with their hits |
| MCTRICHRing | |
| MCTruth | Class which holds summary of MC truth information |
| MCVee | |
| MCVee_Tree | |
| MdbAbsMippTable | |
| MdbAbsRelDB | |
| MdbAbsRelDBColumn | |
| MdbAbsRelDBConstraint | |
| MdbAbsRelDBOrder | |
| MdbAbsRelDBRow | |
| MdbAbsRelDBTable | |
| MdbAbsRelDBVar | |
| MdbCreateXMLTable< T, R > | |
| MdbDatabase | |
| MdbPostGresConstraint | |
| MdbPostGresOrder | |
| MdbPostGresTable | |
| MdbPostGresVar | |
| MdbTableDict | |
| MdbTableOneRun | |
| MdbTableOneRunRow | |
| MdbTableOneRunXML | |
| MdbTableRunSubRun | |
| MdbTableRunSubRunRow | |
| MdbTableRunSubRunXML | |
| MdbTableTimestamp | |
| MdbTableTimestampRow | |
| MdbTableTimestampXML | |
| MeasurementB | Base Class for a measurement implementig a IMeasurement |
| MeasurementServer | |
| Merge | |
| metagrid | |
| metaobservation | |
| metapoint | |
| MethodHelp | |
| MIPPBeamTrkSummary | MIPP Event summary data |
| MIPPCaloSummary | MIPP Event summary data |
| MIPPDCkovSummary | MIPP Event summary data |
| MIPPDisplay | |
| MIPPEventSummary | |
| MIPPHCalSummary | |
| MIPPMCBeamTrkSummary | MIPP Monte Carlo beam particle summary data |
| MIPPMCSummary | MIPP Monte Carlo event summary |
| MIPPMCTrackHits | |
| MIPPMCTrackSummary | MIPP Monte Carlo track summary data |
| MIPPMCVertexSummary | MIPP Monte Carlo vertex summary data |
| MIPPPIDSummary | MIPP track PID summary data |
| MIPPRICHSummary | MIPP Event summary data |
| MIPPRunSummary | MIPP Run summary data |
| MIPPSegSummary | MIPP Event summary data |
| MIPPSpillSummary | MIPP Spill summary data |
| MIPPT0Summary | |
| MIPPToFPMTSummary | MIPP Event summary data |
| MIPPToFSummary | MIPP Event summary data |
| MIPPTPCSummary | MIPP Event summary data |
| MIPPTrackSummary | MIPP Event summary data |
| MIPPVertexSummary | MIPP Vertex summary data |
| MIPPView2D | |
| MIPPView3D | |
| MirFrac | |
| MMCApplication | Class to interface MIPP MC to TVirtualMCApplication |
| MMCStack | |
| MMCSwim | Class which can swim a track using virtual MonteCarlo machinery |
| MMCTrack | Track which can be swum through virtual MC mechanism |
| ModelB | Base class for Model |
| ModelConverterB | Base class for model IModelConverter |
| ModelSurfaceIntersectorB | |
| ModerateSizeArrayCheck | |
| ModuleA | |
| ModuleB | |
| momentum_t | |
| momres | |
| msHelixNoiser | This class computes the Multiple Scattering matrix associated to a StraightLine model See StraightLineModel.h" |
| msStraightLineGlobalNoiser | This class computes the Multiple Scattering matrix associated to a StraightLine model See StraightLineModel.h" |
| msStraightLineLocalNoiser | This class computes the Multiple Scattering matrix associated to a StraightLine model See StraightLineModel.h" |
| MstTokenize | |
| MultiPolynomial_MultiPolynomialModelConverter | |
| MultiPolynomialModel | This a model of the type: |
| MultiPolynomialProjector | The characteristics of this projector are explained in MultiPolynomialModel.h |
| MultiPolynomialPropagator | The characteristics of this propagator are explained in MultiPolynomialModel.h |
| muxtomdl | |
| MWPCBadWireSearch | |
| MWPCCanvas | |
| MWPCDigit | |
| MWPCDigitizer | |
| MWPCElecCanvas | |
| MWPCWireStatus | Class to define hot, dead, and repeating wires in MWPC |
| MXML | Simple one-stop-shopping for starting the MXML package |
| MXMLAttribute | |
| MXMLboolBuilder | Construct a vector<bool> from XML data |
| MXMLBuilder | Base class for classes which construct C++ objects from XML data |
| MXMLBuilderFac | |
| MXMLdbdoc | |
| MXMLdbRowBuilder | |
| MXMLdbTableBuilder | Read in db tables |
| MXMLdbTableColumnBuilder | Read in db tables |
| MXMLdbTableEntryBuilder | Read in db tables |
| MXMLdbVal | |
| MXMLdoubleBuilder | Construct a vector<double> from XML data |
| MXMLfloatBuilder | |
| MXMLintBuilder | Build a vector<int> from XML data |
| MXMLParser | |
| MXMLSAX2DefaultHandler | |
| MXMLSAX2Handler | This class is used to hold the state of parsing between the startElement and endElement calls |
| MXMLshortBuilder | Build a vector<short> from XML data |
| MXMLStack< T > | A templated stack class to hold objects created from XML data |
| MXMLString | |
| MXMLstringBuilder | Create a vector<string> from XML data |
| MXMLuintBuilder | Build a vector<unsigned int> from XML data |
| MXMLushortBuilder | Build a vector<unsigned short> from XML data |
| MXMLxmlfileBuilder | Handle the xmlfile tag which defines a list of XML files to parse |
| Navigator | This is the machine that operate Trajectories, Points and States This machine can: -Fit a trajectory using a IFitter |
| NestedStructTest | |
| NewCuts_t | |
| nll | |
| NM1DFunc | |
| NMBrent | |
| NMDFPMin | |
| NMGammaFunction | - Id
- NMGammaFunction.h,v 1.1 2003/12/04 00:13:11 lebedev Exp
|
| NMGaussJordan | |
| NMInterp | Routines for interpolation |
| NMLinMin | |
| NMLnSrch | |
| NMMarquardt | |
| NMMnBrak | |
| NMMultiDFunc | |
| NMMultiDFuncWrapper | |
| NMNormalFunction | - Id
- NMNormalFunction.h,v 1.2 2006/02/02 23:27:37 lebedev Exp
|
| NMPowell | |
| NMRandom | Standard MIPP random number generator |
| NMSTLUtil | |
| NoiserB | Basic Implementation for noiser |
| nt_t | |
| NuMIBeamAna | |
| NuMIDigit | |
| NuMIGoodEvent | |
| NuMIMCTracking | |
| NuMIMigMatrix | |
| NuMIPID | |
| NuMIPid | |
| NuMIPzPtBin | |
| NuMIRunQAna | |
| NuMITgtAna | |
| NuMITrigNt | |
| NuMITrigStudy | |
| NuMIudst | A "micro" dst for NuMI analysis |
| OMBeamCKOVModule | |
| OMCkovModule | |
| OMDCModule | |
| OMECALModule | |
| OMFileServer | Find the name of the next file the monitoring should process |
| OMGui | |
| OMGuiDetectorFrame | |
| OMGuiHeaderBar | |
| OMGuiMainWindow | |
| OMGuiMenuBar | |
| OMGuiStatusBar | |
| OMH1F | |
| OMH2F | |
| OMH3F | |
| OMHCALModule | |
| OMHistoList | |
| OMMddModule | |
| OMModule | |
| OMModuleList | |
| OMMsgBox | |
| OMMWPCModule | |
| OMNuMIModule | |
| OMNuMITrigModule | |
| OMPad | |
| OMProf | |
| OMRICHModule | |
| OMRootFile | |
| OMScalerDisplay | |
| OMScalerModule | |
| OMShiftHistView | A standalone window which cycles through a set of plots defined in OMShiftHistView.xml and superimposes them on top of reference plots |
| OMShiftPrintList | |
| OMStateMachine | |
| OMStatsModule | |
| OMStyle | |
| OMToFModule | |
| OMTPCModule | |
| OMView | |
| OMViewList | |
| OMXMLonmondoc | Handle the tag marking the start of a job document |
| OMXMLpad | Handle the pad tag which defines a "pad" for the online monitoring |
| OMXMLview | Handle the view tag which defines a "view" for the online monitoring |
| Pair | |
| Pair_t | |
| ParamFrame | |
| particle | |
| pcounts_t | |
| PedCKOV | |
| PedCKOVChanStat | |
| Pedestals | |
| pileup_paras_st | |
| PointB | This is a General base class for a IPoint |
| PointCompZ | |
| primvtxfit_paras_st | |
| Priors | |
| ProjectorB | Basic implementation for projector |
| PropagatorB | Basic implementation for propagator |
| quasibeam_cuts_st | |
| R0CalibNt | |
| R0CalTrkNt | |
| R2REventHandle | |
| R2RIoModule | |
| RadCorr_t | |
| RawDigit | |
| RBKPoint | |
| RBKTrack | |
| RBKVertex | |
| RBMeasurement | |
| RBPID | |
| RBResidNt | This class defines standard reconstructed track residual ntuple |
| RBSpacePoint | |
| RBViewHit | |
| rcpconfig_ | |
| RCVee_Tree | |
| Read | |
| ReadE907 | |
| ReadSpecialData | |
| RecoAnalysis | |
| RIBCkov | Class which provides standard access to beam cherenkov pressure, temperature, and density for a given run |
| RIBfield | |
| RICHBadChanFilter | |
| RICHBadChanTable | Interface for RICH bad channel table in MIPP database |
| RICHCal | |
| RICHCalNt | |
| RICHCalTable | |
| RICHChan | |
| RICHCirc | |
| RICHCircComp | |
| RICHCircFit | |
| RICHCircFitNt | |
| RICHDigit | |
| RICHDigitizer | |
| RICHDigitizer::DigitInfo_t | |
| RICHExample | |
| RICHExpectedPE | |
| RICHFastLL | |
| RICHHits | |
| RICHLightSummary | |
| RICHMatch | |
| RICHMatchNt | |
| RICHParameter | |
| RICHPid | |
| RICHRadFit | |
| RICHRadFitNt | |
| RICHReco | |
| RICHRecoNt | |
| RICHRecoUtil | |
| RICHRing | |
| RICHRingMatch | |
| RICHrpChiSqr | |
| RICHSeedFit | |
| RICHSeedFit::PMTHit_t | |
| RICHSeedFit::TrackRing_t | |
| RICHSeedNt | |
| RICHTrkMatch | |
| RICHTrkMatch::TrkInfo_t | |
| RICHTrkMatchNt | |
| RIDB | Class which provides database interface for runs and slowmon databases |
| RIGasDev | |
| RIHV | |
| RIHVDev | |
| RIMCConfig | Class which defines interface to mcruns table in runs DB |
| RingBiasNt | |
| RIRich | |
| RIRunConfig | Class which contains information about the run/subrun of interest |
| RIRunConfig::Detector_t | |
| RIRunConfig::Subrun_t | |
| RIRunConfig::TrigBit_t | |
| RISlowCtrl | A singleton class which manages all slow control devices |
| RISlowCtrlDev | Class which holds information about a given slow control variable (or device) |
| RISlowmonAlarm | Singleton class which holds information about all alarms for a given run |
| RISlowmonSingleAlarm | Structure for one row in Slowmon_alarm |
| RITarget | |
| RITPCCalib | |
| RITPCConfig | |
| RIWeather | Class which interfaces to weather table of slowmon DB |
| RunConfig | |
| RungeKuttaState | |
| RunR0_t | |
| ScintDigitizer | |
| ScinteractionPlots | |
| ScintPed | Define interface to ScintPed DB table |
| ScintPedCalc | |
| SciThres | |
| SCVals_t | |
| SegCuts_t | |
| Set | |
| Setup | |
| SimpleStructReturnTest | |
| SortByMainParameter | |
| SortByMomentum | |
| sortingByR | |
| sortingByX | |
| sortingByY | |
| sortingByZ | |
| sortingGoodness | |
| sortingProbability | |
| sortingReverseByR | |
| sortingReverseByX | |
| sortingReverseByY | |
| sortingReverseByZ | |
| SortTracks | |
| SPCandMatchNt | |
| SPCompMap< T > | |
| SPCompMap< T >::comp_ | |
| spectrks_st | |
| SPFit | |
| SPFitTrkComp | |
| SPFitTrkComp::TrkSummary_t | |
| SPResidNt | |
| SPSegAssn | |
| SPTCNt | |
| SPTrack | |
| SPTrackNt | |
| SPTrk | |
| SPTrkBuilder | Build a global track from TPC seed |
| SPTrkClust | Associated TPC and wire chamber segments |
| StartUpOptions | |
| StateB | General Base class for a IState |
| StraightLineGlobalProjector | The characteristics of this projector are explained in StraightLineModel.h |
| StraightLineGlobalPropagator | The characteristics of this propagator are explained in StraightLineModel.h |
| StraightLineLocal_CylinderIntersector | |
| StraightLineLocal_HelixModelConverter | |
| StraightLineLocal_RectangleIntersector | |
| StraightLineLocal_RingIntersector | |
| StraightLineLocalProjector | The characteristics of this projector are explained in StraightLineModel.h |
| StraightLineLocalPropagator | The characteristics of this propagator are explained in StraightLineModel.h |
| StraightLineLocalVertexProjector | The characteristics of this VertexProjector are explained in StraightLineModel.h |
| StraightLineModel | Model for Straight Lines |
| Sum | |
| SurfaceB | |
| SurfaceServer | |
| SwimDrift | Class which drifts electrons in the TPC |
| SwimDriftMap | Class which has a map of drift velocity vector as a function of magnetic field strength and the angle between B and E |
| Swimmer | Class which implements swimming a SwimMIPP track through the spectrometer |
| Swimmer::SwimParam_t | |
| SwimMIPP | Class which provides a uniform interface to swim a particle across the entire MIPP spectrometer |
| T0Calib | This module will take the raw data lists for the T0 channels and do some simple processing to get calibration constants |
| T0CalibTable | Define interface to T0CalibTable DB table |
| T0CalibTable::ADCCorr_t | |
| T0CalibTable::TimeCorr_t | |
| T0Hit | Class that stores T0 Hit information: hit times of each PMT as well as average time, its average and variance, total deposited charge |
| T0Nt | Class which defines ntuple which may be written out for good events |
| T0Reco | Reconstruct the T0 information for this event |
| T0RecoNt | |
| T0Time | Class which defines T0 time |
| tagErlogrRec | |
| tagErlogrRtRec | |
| Test1DFunc | |
| Test2DFunc | |
| Test3DFunc | |
| Test4DFunc | |
| TestBase64 | |
| TestBfield | |
| TestBuilder | Test the handling of edit and build functions |
| TestEditor | |
| TestGauss | |
| TestObs | Test the CfgTable and CfgObserver classes |
| TestObserver | |
| RITargetAZ::tgtAZ | |
| TH1FRot | |
| timeb | |
| TOFAdjHit | Define interface to TOFAdjHit DB table |
| TOFAdjHit::Entry_t | |
| TOFAna | |
| TOFBadChannel | Define interface to TOFBadChannel DB table |
| TOFBarAdc | Define interface to TOFBarAdc DB table |
| TOFBarAdc::Entry_t | |
| TOFBarAtt | Define interface to TOFBarAtt DB table |
| TOFBarAtt::Entry_t | |
| TOFBarHit | |
| TOFBarResol | Define interface to TOFBarResol DB table |
| TOFBarResol::Entry_t | |
| TOFBarSOL | Define interface to TOFBarSOL DB table |
| TOFBarSOL::Entry_t | |
| TOFCable | Define interface to TOFCable DB table |
| TOFCable::Entry_t | |
| TOFCalib2 | |
| TOFData | |
| TOFDigit | |
| TOFDigitizer | |
| TOFDNCorr | Define interface to TOFDNCorr DB table |
| TOFDNCorr::Entry_t | |
| TOFFindBadChan | |
| TOFMCPars | |
| TOFPed | Define interface to TOFPed DB table |
| TOFPed::Entry_t | |
| TOFPedCalc | |
| TOFPid | |
| TOFPMTSummary | |
| TOFSlew | Define interface to TOFSlew DB table |
| TOFSlew::Entry_t | |
| TOFTempCorr | Define interface to TOFTempCorr DB table |
| TOFTempCorr::Entry_t | |
| TOFTempCorrector | |
| TOFTReco | |
| TOFTrkMatch | |
| TOFUtil | |
| TOFWallCalib | |
| TPCAnodeCalib | Interface to TPCAnodeCalib database table |
| TPCBadChannel | |
| TPCBadChanTable | |
| TPCdEdx | |
| TPCdEdxBBloch | Interface to TPCdEdxBBloch database table |
| TPCdEdxCalib | Interface to TPCdEdxCalib database table |
| TPCdEdxResol | Define interface to TPCdEdxResol DB table |
| TPCdEdxResol::Entry_t | |
| TPCdEdxResolRR | |
| TPCDigiGain | |
| TPCDigiGainNt | |
| TPCDigit | |
| TPCDigitizer | |
| TPCDigitizer::DigitInfo_t | |
| TPCDigitUtil | |
| TPCDriftCalib | Interface to TPCDriftCalib database table |
| TPCDriftMap | Class which provides a look-up map of conversion (x,y,z) to (x',t',z') of TPC drift hits |
| TPCEventInfo | |
| TPCGainAnalysis | |
| TPCPad | |
| TPCPass1 | |
| TPCPass2 | |
| TPCPed | |
| TPCPid | |
| TPCR1DCluster | |
| TPCR1DClusterParams | |
| TPCR1DPeak | |
| TPCR2DCluster | |
| TPCR2DClusterFind | |
| TPCRAnodeCalib | |
| TPCRBadPad | |
| TPCRBadPad::TpcStick | |
| TPCRBadPads | |
| TPCRBadRows | |
| TPCRClusterParams | |
| TPCRdEdx | |
| TPCRdEdxCalib | |
| TPCRdEdxCorParas | |
| TPCRdEdxPID | |
| TPCRdEdxPIDParas | |
| TPCRdEdxStudies | |
| TPCRDigit | |
| TPCRDrifrVelCal | |
| TPCRDriftCalib | |
| TPCRE907HitParas | |
| TPCReco | |
| TPCResCorMaker | Make the maps of TPC residuals for final hit position corrections |
| TPCResCorMap | |
| TPCRGeom | |
| TPCRHit | |
| TPCRHitClus | |
| TPCRHitFind | |
| TPCRHits | |
| TPCRPadPeak | |
| TPCRPadRowADC | |
| TPCRPadT0Offset | |
| TPCRPadToff | |
| TPCRPadToff::TpcStick | |
| TPCRParams | |
| TPCRPid | |
| TPCRRawPeak | |
| TPCRStatus | |
| TPCRStickMap | |
| TPCRSum | |
| TPCRTimeOffset | |
| TPCRTrack | |
| TPCRTrackFind | |
| TPCRTrackParams | |
| TPCRTrk | |
| TPCRTrkHitMap | |
| TPCRTrkParas | |
| TPCRUtils | |
| TPCRVertexPos | |
| TPCRVtxParas | |
| TPCRVtxTrks | |
| TPCStickInfo | |
| TPCTCorr | Interface to TPCTCorr database table |
| TpcTrack | |
| TpcTrack::Entry | |
| TpcTrackList | |
| Track | |
| Track::Entry | |
| TrackBeamNt | |
| TrackBeamPart | |
| TrackBeamPart::TrkInfo_t | |
| TrackEffCham | Module which calculates chamber efficiency for each subrun |
| trackfit_st | |
| TrackFitRes | |
| TrackList | |
| TrackProjector | |
| TrackReco | |
| TrackSeg | A straight track segment with points defined by chambers |
| TrackSegComp | |
| TrackSegCompNt | |
| TrackStudies | |
| TrackTDrift | Class which looks for correlation between hit residual and wire drift time |
| TrajectoryB | A basic implementation of the trajectory interface |
| TrajectoryEngine | This is the machine that operate Trajectories, Points and States This machine can: -Fit a trajectory using a IFitter |
| TrajectoryFactoryB | This class provides an interface for creating: IStates, IPoints, ITrayectories IMPORTANT!! DO NOT FORGET to destroy of the interfase via the TrajectoryFactory!! |
| TrajectoryManager | About the Trajectory Server the Manager has NOT a trajectory server |
| TrajectoryServer | |
| tree_desc | |
| TrgtPositionTable | Interface to tgtscintgeo database table |
| TrigBit | - Id
- TrigBit.h,v 1.4 2005/05/17 21:07:33 alebedev Exp
|
| TrigBTOFana | |
| TrigCalib | - Id
- TrigCalib.h,v 1.1 2005/06/20 17:48:25 lebedev Exp
|
| TrigCalibration | Job module to calculate calibration constants for trigger reconstruction |
| TrigChan | A class which stores calibrated hit times of LRS3377 channels |
| TrigDoCalib | This module takes TrigInput's and corrects the timing w.r.t |
| TrigDoT0 | |
| TrigDoT0::Group_t | |
| TrigInput | - Id
- TrigInput.h,v 1.6 2005/06/06 14:47:57 lebedev Exp
|
| TrigLatchSelect | A simple module to filter events based on trigger latch words |
| TrigPlot | A job module to create plots of trigger bits, inputs, words, etc |
| TrigPlot::HistoParam_t | |
| TrigReco | A trigger reconstruction module, which creates TrigWord objects, and adds them to Reco bucket (either "/trig/beam" or "/trig/misc" folder) |
| TrigReco::ChanTDC_t | Structure to store channels to be excluded after a trigger word is created |
| TrigT0 | Class which defines trigger time with respect to nominal trigger time based on T01 3/4 timing |
| TrigTDCEntry | A very simple class to do book-keeping of trigger TDC entries |
| TrigWord | Reconstruction trigger word |
| Trk456Ana | |
| trk_clust_ | |
| trk_cross_ | |
| trk_seg_ | Struct to hold information for track segment |
| TrkCand | Track Candidate consisting of at least 2 track segments |
| TrkCandBuilder | This class attempts to connect C123 to C456 track segment |
| TrkCandBuilder::Trk_t | |
| TrkCandNt | |
| TrkChamGeo | Class which provides interface to TrkChamGeo DB table |
| TrkChamGeo::Data_t | |
| TrkChamT0 | |
| TrkCheckBC | |
| TrkCrossNt | |
| TrkMakeClust | |
| TrkMakeCross | Module which takes WireClust's and forms WireCross'es |
| TrkNumComp | |
| TrkPlaneOffset | Class which provides interface to TrkPlaneOffset DB table |
| TrkSegBuilder | This module assembles WireCross'es from various chambers into straight track segments |
| TrkSegFitter | Module that picks up |
| TrkSegFitter::HypoHit_t | |
| TrkSegFitter::HypoTrack_t | |
| TrkWireFilter | Module which takes DCDigit's and MWPCDigit's and forms Wire's |
| TubeIntersector | |
| TubeVolumeFactory | |
| udst | |
| UtilMemCheck | |
| UtilMemCheckNt | |
| v0_paras_st | |
| v0trks_st | |
| ValiCham | |
| ValiMC | |
| Variable_t | |
| Vertex | |
| Vertex::Entry | |
| VertexB | |
| VertexFitterB | Basic implementation for a VertexFitter |
| VertexList | |
| VertexServer | |
| VFinder | |
| VolumeB | Base class for volumen |
| VolumeFactoryB | |
| VolumeIntersectorB | |
| VtxConFit | |
| VtxConNt | |
| VtxDAFit | |
| VtxTTrack | This class describes a track which can fit itself through template method using information about a vertex |
| Wire | Class which defines a hit, calibrated DC or PWC wire |
| WireClust | Define a class for wire clusters |
| WireComp | |
| WireCross | WireCross is a collection of 2-4 WireClust's from different planes of one chamber |
| XmlRpc::XmlRpcClient | A class to send XML RPC requests to a server and return the results |
| XmlRpc::XmlRpcDispatch | An object which monitors file descriptors for events and performs callbacks when interesting events happen |
| XmlRpc::XmlRpcDispatch::MonitoredSource | |
| XmlRpc::XmlRpcErrorHandler | An interface allowing custom handling of error message reporting |
| XmlRpc::XmlRpcException | A class representing an error |
| XmlRpc::XmlRpcLogHandler | An interface allowing custom handling of informational message reporting |
| XmlRpc::XmlRpcServer | A class to handle XML RPC requests |
| XmlRpc::XmlRpcServerConnection | A class to handle XML RPC requests from a particular client |
| XmlRpc::XmlRpcServerMethod | Abstract class representing a single RPC method |
| XmlRpc::XmlRpcSocket | A platform-independent socket API |
| XmlRpc::XmlRpcSource | An RPC source represents a file descriptor to monitor |
| XmlRpc::XmlRpcUtil | Utilities for XML parsing, encoding, and decoding and message handlers |
| XmlRpc::XmlRpcValue | RPC method arguments and results are represented by Values |
| YYSTYPE | |
| yytoktype | |
| ZIP | |
| zippoint | |
| zipraw | |
| ZT | |
| ZT1DPlotDialog | |
| ZT2DPlotDialog | |
| ZT3DView | |
| ZTButtonBar | |
| ZTCanvas | |
| ZTDirectionMenu | |
| ZTEditMenu | |
| ZTFileMenu | |
| ZTHelpMenu | |
| ZTIoModule | |
| ZTJobC | |
| ZTMainDisplay | |
| ZTMainWindow | |
| ZTMakePlots | |
| ZTMap | |
| ZTMaxwell | |
| ZTMenuBar | |
| ZTPlotMenu | |
| ZTPrintable | |
| ZTPrintDialog | |
| ZTRootEnv | |
| ZTTH3Plots | |
| ZTTTree | |
| ZTWindow | |
| zunzip_desc | |
| zzip_desc | |
